Model Number: Y6-41-11 Boiler blower
Brand Name: Tong Tian
Key Specifications/Special Features:
1, GY6-41 electro induced draft fan for boiler centrifugal drum USES G (Y) 6-41 type boiler, induced draft fan, the burning of coal with smoke prevention and dust control device for 0.5-10 t/h industrial boiler joint design, the highest total pressure efficiency up to 86.3% of new boiler feeding system for the wind. This series of fan can also be used for dust removal, mine ventilation and general ventilation systems. All air inlet conditions, performance and adapt to, all can choose, but the highest temperature should not exceed 250 ℃. For the air blower of conveying medium. With impurity concentrations less than 200mg/m3 available more than 4 years. Such as impurities in big can also be used, but will shorten the service life.2, GY6-41 in the form of electro induced draft fan for boiler centrifugal drum1) Made single suction fan form.2) Fan rotate or right and can be made into the left two forms.3) fan outlet position to export Angle said chassis.4) Is c type, fan drive belt wheel transmission5) product full name for the following: Y6-41 № 12 right 90 ° cY6-41 № 12 right 45 ° c2, GY6-41 and the structure characteristics of electro induced draft fan for boiler centrifugal drum1) This series adopted the high strength wear resistant impeller, prevent oil bearing box, joint type axial damper and other advanced patent technology.2) Wide range of efficient working condition, the fan immediately arranged closely, easy pickings efficient point.3) Using the adjustable air inlet. Fan installed in the adjustment of air inlet and the impeller of axial and radial clearance.4) High strength wear resistant impeller. Impeller after using the veneer, reduce air impact, good stability, motor overload not easily, greatly extend the service life of the fan. This type of fan week high pressure coefficient, low speed, low noise, and good practicability.
5) Oil spill prevention bearing box. Lap type high speed rotary bearing oil slinger will take up bearing walls to jilt to flow back to oil pool; Half open aluminum oil seal in addition to the friction convenient maintenance and prevent accidents, can increase along the axial resistance will be part of the thin oil cut oil pool; The lateral pressure of packing is a little thin oil blocks; The upper bearing box is equipped with air plug reduced the micro positive pressure in the bearing box, ensure no leakage, dustproof performance is good.
6) Joint type axial damper. Damper guide blade pivot and regulating rod are equipped with joint bearing, no "dead" in operation and adjustment process, adjustment flexible energy saving, safe and reliable, and ensures the actuator but load.
7) For whole or packaged fission of the fan. This series of fan drive under 16 d group, coupling cover, motor factory before on the base of a complete assembly; Chassis, air inlet, and adjust the door to another component
By certification [File Integrity]
